Avaya C360 - Manual (Page 182)

Avaya C360 Layer 3 Features
182 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
Set the source list, destination
list, and destination module for
copying an entire Policy List ip access-list-copy
Set the DSCP-to-COS mapping.
Based on range and action
parameters, system will apply
mapping to frames ip access-list-dscp operation
Designates which original frame
fields influence internal queues
selection ip access-list-dscp trust
Assign a name to a Policy List ip access-list-name
Add the name of an owner to a
Policy List ip access-list-owner
Delete an access-list element or
a Policy List no ip access-list
Activate a Policy List ip access-group
Deactivate a Policy List no ip access-group
Display the DSCP to CoS map
of a policy-list show ip access-list dscp
Set the list cookie for a specific
policy list ip access-list-cookie
Display an access list show ip access-list
Activate the "simulate" process
for a packet containing a specific
field ip simulate
Test the validity of a Policy List validate-group
Display the active policy-list
number show ip access-group
Display the DSCP to CoS map
of a policy-list show ip access-list-dscp
Display summary information
regarding all configured access
lists show ip-access-list-summary
In order to... Use the following command...
2 of 3