Port mirroring cli commands, Port mirroring implementation in the c360, Weighted queuing – Avaya C360 User Manual
Page 145: Implementation of weighted queuing in the c360
Weighted Queuing
Issue 1 July 2006
145
Port Mirroring CLI commands
Port Mirroring Implementation in the C360
Note the following limitations:
●
The VLAN binding parameters of the source and destination ports must be identical.
●
Ports which are members in a Link Aggregation Group (LAG) cannot also be used as Port
Mirroring Destination or Source ports.
●
On the stack level, port mirroring pairs can be configured between any Giga port, and
between any Giga port on the C360 and any 10/100Mbps port not residing on a C360.
Weighted Queuing
The Weighted Queuing feature allows the user to configure the priority scheme between the
internal priority queues as "Strict Priority" or to configure it as a Weighted Round Robin (WRR)
scheme, with user-configurable weights.
Tip:
Tip:
If the queuing scheme commands are to be implemented on a C360 switch other
than the stack master, a session should be opened to the relevant switch.
Implementation of Weighted Queuing in the C360
The user is able to set the Priority scheme to either "Strict" or "WRR." The choice of option
impacts in the following way on the operation of the modules installed in the stack.
In order to...
Use the following command...
Define a port mirroring
source-destination pair in the
switch
set port mirror
Display port mirroring
information for the switch
show port mirror
Cancel port mirroring
clear port mirror