Avaya C360 - Manual (Page 158)

Avaya C360 Layer 3 Features
158 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
Activating a Routing License Key
To activate a Routing License Key:
1. Enter the acquired Routing License Key into the C360 switch using the set license CLI
CLI command.
set license
[module] [license] [featureName]
where:
module - C360 switch number (the location of the device in the stack)
license - license code
featureName - routing
and press Enter.
2. Reset the module.
3. Check that the license is activated using the show license CLI command.
License Key CLI Commands
What is Routing?
Routing enables transfer of a data packet from source to destination using a device called a
router. Routing involves two basic activities:
● determining optimal routing paths
● transmitting information packets through an internetwork
Routers use routing tables to determine the routes to particular network destinations and, in
some cases, metrics associated with those routes. Routers communicate with one another and
maintain their routing tables through the transmission of a variety of messages.
In order to... Use the following command...
Configure the feature license set license
Display the feature license show license
Display the switch identity
required for acquiring a license show module-identity