Avaya C360 - Manual (Page 166)

Avaya C360 Layer 3 Features
166 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
RIP CLI Commands
In order to... Use the following command...
Configure the Routing
Information Protocol (RIP) router rip
Specify a list of networks on
which the RIP is running network
Redistribute routing information
from other protocols into RIP redistribute
Specify the RIP version running
on the interface basis ip rip rip-version
Set the interface RIP route
metric value default-metric
Set the RIP Send and Receive
mode on an interface ip rip send-receive
Enable learning of the default
route received by the RIP ip rip default-route-mode
Enable split-horizon with
poison-reverse on an interface ip rip poison-reverse
Enable split-horizon mechanism ip rip split-horizon
Specify the type of
authentication used in RIP
Version 2 packets ip rip authentication mode
Set the authentication string
used on the interface ip rip authentication key
Specify the RIP timers values timers basic