Avaya C360 - Manual (Page 47)

Installing SFP GBIC Transceivers
Issue 1 July 2006 47
Copper GBIC Transceiver Installation Notes
Before installing a copper SFP transceiver, ensure that auto-negotiation is enabled for the
transceiver ports. You should also ensure that the auto-negotiation is enabled for the port at the
other end of the link:
1. Use the show port command to check the auto-negotiation status of the transceiver ports.
2. Use the set port negotiation <module>/<port> enable command to enable
auto-negotiation if necessary.
1000BASE-LX SM 9 N/A 10,000 2 1,310
1000BASE-ELX SM 9 N/A 70,000 10,000 1,550
Table 8: Gigabit Fiber Optic Cabling 2 of 2
Gigabit
Interface Fiber
Type Diameter
(µm) Modal
Bandwidth
(MhzKm) Maximum
Distance
(m) Minimum
Distance
(m) Wavelength
(nm)
2 of 2