Potter PFC-6075R - Manual (Page 69)

5-63
PFC-6075R • 5403594 • REV D • 9/14
Programming Functions Overview
The table below gives you a snapshot of the menu order along with a brief description of each. Details for these options are
provided on the following pages.
Table 12: Programming Menu Overview
Menu Option Description
Remote Access Code Displays remote access “User Name” and “Password”.
Job Details Allows site specific information to be entered.
General Options
Allows software’s general panel settings to be customized, such as alarm verification time, and
door holder low AC dropout delay.
Zones Define and configure zone’s characteristics and mapping points.
Cross Zones Establish relationships between multiple zones.
Points Define and view all addressable and non-addressable points.
Sensitivity Enable Day/Night Sensitivity, setup Holiday schedule, and other related sensitivity options.
E-mail Reporting
Schedule e-mail reports by day and time; setup e-mail addresses, and select type of report(s) to
send to each e-mail addressee.
E-mail Reminders Create and schedule customized daily, weekly, monthly or yearly reminder e-mails.
Users Create up to ten (10) user codes and passwords, and set access rights.
LAN Settings Configure Ethernet connectivity options.
Dialer Add or remove DACT module/appliance.
IP Reporting Configure IP reporting options for primary and secondary accounts.
Class A Card Add or remove Class A card.
Annunciators Add or remove Remote Annunciators.
SLC Loop Add or remove SLC Loops.
Power Supply Add or remove Power Supplies.
DRV-50 Add or remove DRV-50 driver modules.
LED-16 Add or remove LED-16 Annunciators.
RLY-5 Add or remove RLY-5 modules.
FCB-1000 Add or remove FCB-1000 modules.
SPG-1000 Add or remove SPG-1000 modules.
FIB-1000 Add or remove FIB-1000 modules.