Demo (demonstration) mode, To cancel demo mode, To reenter demo mode – Aiwa NSX-999 User Manual

Page 16: After a power interruption, Before operation, To turn on the unit -+ b, After use, After turning on the unit, Illumination guide, Headphones

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

PREPARATIONS

DEMO-

...n_____ !

ii“I'O

FH»--.

"0 r,

oQCiTg)cp

I-,"

• 0 r 0 0

...........

n... ■'

h

-

■4 ->

-----------------

DEMO (DEMONSTRATION) MODE

When you first connect the AC cord, the display window demon­
strates the unit’s preset functions.
When the power is turned on, the DEMO display is hidden by the
operation display. When the power is turned off, it is restored.

To cancel DEMO mode -» □

Press the DEMO button.

To reenter DEMO mode

Press the DEMO button again.

After a power interruption

The unit enters DEMO mode.

DEMO

o

B

ICLEAR

POWER

o

ÒSTANDBY/ON

SET

BEFORE OPERATION

To turn on the unit -+ B

Press the POWER button.

You can also turn the unit on by pressing one of the direct play
buttons. (See “DIRECT PLAY FUNCTIONS”.)

The disc compartment may open and close for resetting the unit.

After use

Press the POWER button to turn off the power. The display

changes to clock or DEMO mode.

After turning on the unit

The flash window above the disc compartment lights up.

For 4 seconds, the most recently used function button flashes in
red.
No operation may be carried out during this 4-second period.

The flash window -► B

The flash window shows the power is on. It flashes when the disc
compartment is opened or closed, and when the trays are rotated.
To turn it off, press the CD button while pressing the ■ CLEAR

button.

To turn it back on, repeat the procedure.
• Do not carry out this operation during recording.

illumination guide -*

Whenever one of the function buttons is pressed, the buttons for
that operation light up or flash.

Example:

When connecting the AC cord, the II SET button flashes to guide
you in setting the current time.

Headphones

Connect headphones to the PHONES jack with a stereo standard
plug (

06.3

mm/V4 inch).

No sound is heard from the speakers while headphones are

plugged in.

After a power interruption

The current time needs to be reset. (See page 20.)
• If power is interrupted for more than about 24 hours, you will also

have to reset preset stations and timer playback or recording

settings.

-

16

Advertising