Basic operations, 1 press the tape/ deck 1/2 button, Push the cassette hoider to cióse it – Aiwa NSX-999 User Manual

Page 36: 3 set dolby nr to match the playback tape, 4 press the button to start playback, Display, Ilipipil, 0 0 co, Ifjlllib

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

TAPE PLAYBACK

BASIC OPERATIONS

3

2

1

■REV MODE

4

DECK 1/2

TAPE

—Ì

..............

I I I I /_ I

leiisitasippai:

HpiBPpiSI

T n n r I

I I I I /_ I

On deck 1, tapes are always played back on both sides.
On deck 2, you can select reverse mode to play back one or both
sides.

1 Press the TAPE/ DECK 1/2 button.

TAPE is displayed.

If you press the button with power off

The power is turned on and TAPE is dispiayed.

If a tape is ioaded, piay begins without any need to press the

◄ ► button (direct piay function).

2 Open the cassette holder by pressing the EJECT

±

mark and insert a tape exposed side down.
Push the cassette hoider to cióse it.

The deck whose number, 1 or 2, is dispiayed can be operated

by the deck operation buttons.

When tapes are inserted in both decks

The tape in the deck ciosed last will be played. To switch the
deck number, press the TAPE/DECK 1/2 button.

3 Set DOLBY NR to match the playback tape.

For tapes recorded with DOLBY NR,

press the DOLBY NR

button to turn on the Dolby NR. The □□ NR indicator will light.

For tapes recorded without DOLBY NR,

press the DOLBY

NR button to turn off the Dolby NR. The □□ NR indicator will go

off.

4 Press the button to start playback.

Playback starts from the side facing you.

DISPLAY

c

DOLBY NR

DIR/PRESET

□□

nr

ilipipil

J!~ i

Q)

00^

n n “I

U U L

ifJllliB

.L .1

REV MODE
(DECK /2)

d

(ZÌM

r

Í !

0 0 CO

H P£Z

© Playback side of the tape

I>: The side facing you (the front side) is played.

<3: The other side (the side away from you) is played.

® Tape counter

Each deck has a counter, and the counter of the selected

deck is displayed.

To select a reverse mode (deck 2 only) Q

Each time the REV MODE button is pressed, the reverse mode

changes.
The unit can be set to the following reverse modes.

—:

The unit plays one side only and stops.

^5: The unit plays from the front side to the back side and stops.

The unit piays both sides repeatediy.

When playing on deck 1

On deck 1, the REV MODE button does not work. Each side is
played back once and stops.

To stop playback

Press the ■ button.

To pause (deck 2 only)

Press the II button.

The II button flashes.
To resume play, press it again.

ill

36

To be continued.

Advertising