Aiwa NSX-999 - Manual (Page 72)

SPECIFICATIONS
<FM section>
Frequency range
Usable sensitivity (iHF)
Aiternate channei selectivity
Signal-to-noise ratio
Harmonic distortion
Frequency response
Stereo separation
Antenna
<AM section>
Frequency range
Usable sensitivity
Selectivity
Signal-to-noise ratio
Antenna
87.5 MHz to 108 MHz
1.3 |iV (75 ohms) 13.2 dBf
50 dB (±400 kHz)
STEREO: 70 dB
MONO: 76 dB
0.3 % (MONO), 1 kHz
0.5 % (STEREO, L-R), 1 kHz
30 Hz to 15 kHz (+0.5 dB, - 3 dB)
33 dB at 1 kHz
75 ohms (unbalanced)
530 (531 ) kHz to 1710 (1602) kHz
350 |xV/m
22 dB (9 kHz)
53dB(100dBinput)
Loop antenna
<Timer section>
Program timer
Sleep timer
On-timer, free setting
Setting in 10-minute increments,
240 minutes maximum
<Amplifier section>
Power output
Harmonic distortion
Input terminal
Output terminal
<Cassette deck section>
Track format
Frequency response
Signal-to-noise ratio
Tape speed
Recording system
Erasure system
Motor
Heads
FTC RULE
120 watts per channel, Min.
RMS at 6 ohms, from 40 Hz to 12
kHz, with no more than 1% Total
Harmonic Distortion
0.1 % (85 W, 1 kHz, 6 ohms, DIN-
AUDIO)
VIDEO/AUX: 150 mV (adjustable)
MIC: I.OmV/IOkn
SUPER WOOFER : 2.7 V
4 tracks, 2 channels
Cr02 tape: 50-16000 Hz
Normal tape: 50 - 15000 Hz
60 dB (DOLBY NR ON, CrOa tape
peak level)
4.8 cm/sec. (1% ips)
AC bias
AC erase
DC servo motor x 1
Playback head x 1 (deck 1 )
Recording/playback/erasure head
X 1 (deck 2)
72