Dubbing the whole tape, 1 press the tape/deck1/2 button, Note – Aiwa NSX-999 User Manual

Page 50

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

RECORDING

......... S"“" •f-'»

1

DECK 1/2

TAPE

I

“ Ü

o r

I n t

/_

rRECi

SYNCHRO DUBBING

NORMAL HIGH

O O

hi . II i I II

I V Jj LI J.I

IRECI

I

I I

Til I Tl

in

Xl U ±1 _

DUBBING THE WHOLE TAPE

When an original tape is dubbed onto another tape rated at the

same recording time, the back side of the recording tape may not
be an exact dupiicate of the back side of the original tape.

This is because there are differences in actual recording times
between tapes, since each tape has a bit more time than indicated

on the iabei. This time varies with each brand.
This unit’s STSD function ailows you to make exact copies of both
sides of the original tape.

1 Press the TAPE/DECK1/2 button.

If a tape is inserted

When pressing the TAPE/DECK1/2 button with the power off,

piay begins by the direct play function. Press the ■ button to

stop playback.

2 Insert the original tape into deck 1 and the tape to

be recorded on into deck 2.

Press the EJECT ^ marks to open the cassette holders.

Insert the tapes, with the sides to be played back or recorded

first facing you and the exposed sides down.

3 Press one of the SYNCHRO DUBBiNG buttons to

start recording.

@ To dub at normal speed:

Press the NORMAL button.

N-DUB is displayed.

(b)

To dub at high speed:

Press the HIGH button.

H-DUB is displayed.

The tapes are rewound to the beginning of their front sides, and
then recording starts. After the recording of the front side ends,
the back sides of both tapes will start at the same time as soon

as the longer tape has been reversed (STSD function).

To stop dubbing in the middle

Press the ■ button.

NOTE

' Regardless of whether the □□ N R indicator is displayed or not, the

Dolby NR system does not affect the recording.

' Recording is inhibited if the erasure prevention tabón either side

of the tape is broken off.

• If the leader segment of the dubbing tape is longer than that of the

original tape, recording on the back side may stop midway

through the recording. In this case, dub each side manually
following the procedure in “RECORDING FROM TAPE TOTAPE

MANUALLY”.

50

Advertising