Avaya P460 - Manual (Page 117)

Chapter 2 Avaya P460 CLI Commands
Avaya P460 Reference Guide 107
set radius authentication secret
User level: read-write, admin.
Use the set radius authentication secret command to enable secret
authentication for the P330 unit.
The syntax for this command is:
set radius authentication secret <string>
string text password
Example:
P330-N(super)#
set radius authentication server
User level: read-write, admin.
Sets the IP address (and shared secret) of the primary or secondary RADIUS
Authentication server.
The syntax for this command is:
set radius authentication server <ip-addr> {primary |
secondary}
Example:
set radius authentication udp-port
User level: read-write, admin.
Sets the RFC 2138 approved UDP port number.
P460-1(super)# set radius authentication secret hush
ip-addr IP address of the RADIUS authentication server
primary default - Primary authentication server
secondary Secondary authentication server
P460-1(super)# set radius authentication server
192.40.12.36 primary