Avaya P460 - Manual (Page 149)

Chapter 2 Avaya P460 CLI Commands
Avaya P460 Reference Guide 139
Example:
show ip unicast cache
User level: read-write, admin.
Use the show ip unicast cache command to list the entries in the hardware
unicast cache database.
The syntax for this command is:
show ip unicast cache [<ip addr>]
Example:
show ip unicast cache host
User level: read-only, read-write, admin.
Lists hosts that are used as the destination devices.
The syntax for this command is:
show ip unicast cache host [<net addr>][<net mask>]
Router-1> sh ip route summary
IP Route Summary:
Current number of routes: 69
ip addr IP address.
Router-1> show ip unicast cache
Showing 6 Sessions.
IP Address NH MAC NH VLAN
=========== ======== =======
192.168.1.1 29.2.1.1 5
192.168.2.1 29.2.2.1 5
192.168.2.2 29.2.2.2 5
192.168.2.3 29.2.2.3 5
192.168.2.4 29.2.2.4 5
192.168.2.5 29.2.2.5 5