Avaya P460 - Manual (Page 57)

Chapter 2 Avaya P460 CLI Commands
Avaya P460 Reference Guide 47
Use the no ip rip authentication key command to clear the password.
The syntax for this command is:
[no] ip rip authentication key <password>
Example:
To set the authentication string used on the interface “marketing” to be “hush-
hush”.
ip rip authentication mode
User level: read-write, admin.
L You can only access this command in interface mode.
Type interface [name] at the command prompt to enter interface mode if
necessary.
Use the ip rip authentication command to specify the type of authentication
used in RIP Version 2 packets.
Use the no ip rip authentication command to restore the default value of
none.
The syntax for this command is: [no] ip rip authentication mode
[simple|none]
Example:
To specify simple authentication to be used in RIP Version 2 packets on the interface
“marketing”.
password The authentication string for the interface. Up to 16 characters are
allowed.
Router-1(configure-if:marketing) # ip rip authentication
key hush-hush
simple|none The authentication type used in RIP Version 2 packets:
• simple - clear text authentication.
• none - no authentication.
Router-1(configure-if:marketing) # ip rip authentication
mode simple