Avaya P460 - Manual (Page 140)

Chapter 2 Avaya P460 CLI Commands
130 Avaya P460 Reference Guide
show intelligent-multicast
User level: read-only, read-write, admin.
Use the show intelligent-multicast command to display the intelligent
multicast configuration.
The syntax for this command is:
show intelligent-multicast
Example:
show interface
User level: read-only, read-write, admin.
Use the show interface command to display information on network interfaces.
The syntax for this command is:
show interface
Example:
show ip access lists
User level: read-only, read-write, admin.
Use the show ip access lists command to display all the current policy lists.
P460-1> show intelligent-multicast
Intelligent-multicast configuration:
------------------------------------
intelligent-multicast state ---------------------- Disabled
Intelligent-multicast client-port-pruning time --- 600[Sec]
Intelligent-multicast router-port-pruning time --- 1800[Sec]
intelligent-multicast group-filtering-delay time - 10[Sec]
P460-1> show interface
Interface Name Status VLAN IP address Netmask
---------------- -------------- ---- --------------- ---------------
inband disabled 1 135.64.200.105 255.255.255.0
ppp disabled N/A 0.0.0.0 0.0.0.0
outband enabled N/A 135.64.200.105 255.255.255.255