Avaya P460 - Manual (Page 143)

Chapter 2 Avaya P460 CLI Commands
Avaya P460 Reference Guide 133
Example:
If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
show ip ospf
User level: read-only, read-write, admin.
Use the show ip opsf command to displays general information about OSPF
routing.
The syntax for this command is:
show ip ospf
Example:
show ip ospf database
User level: read-only, read-write, admin.
Displays lists of information related to the OSPF database for a specific router.
Router-1> show ip interface
Showing 2 Interfaces
mgmt is administratively up
On vlan Default
Internet address is 10.49.54.14 , subnet mask is
255.255.255.0
Broadcast address is 10.49.54.255
Directed broadcast forwarding is disabled
Proxy ARP is disabled
baba is administratively down
On vlan v2
Internet address is 192.168.0.14 , subnet mask is
255.255.0.0
Broadcast address is 192.168.255.255
Directed broadcast forwarding is disabled
Proxy ARP is disabled
Router-1> show ip ospf