Avaya P460 - Manual (Page 148)

Chapter 2 Avaya P460 CLI Commands
138 Avaya P460 Reference Guide
Example:
show ip route static
User level: read-write, admin.
Use the show ip static route command to display the static routes.
The syntax for this command is:
show ip route static [<ip addr> [<mask>] ]
Example:
show ip route summary
User level: read-only, read-write, admin.
Use the show ip route summary command to display the number of routes
known to the switch.
The syntax for this command is:
show ip route summary
Router-1> show ip route best-match 199.93.0.0
Searching for: 199.93.0.0
Showing 1 rows
Network Mask Interface Next-Hop Cost TTL Source
--------------- ------------------------------------------------ -----
199.93.0.0 255.255.0.0 e-135new 135.64.76.1 1 n/a STAT-HI
ip-address The IP address of the routes
mask The ip mask of the routes.
Router-1> sh ip route static
Showing 34 rows
Network Mask Interface Next-Hop Cost PrefActive
------------- ----------------------------------------------------
10.0.8.0 255.255.255.0e-36 149.49.36.11 1 high Yes
135.0.0.0 255.0.0.0 e-135new 135.64.76.11 high Yes
135.64.0.0 255.255.0.0 e-135 135.87.164.1 1 high No
149.49.0.0 255.255.0.0 zevel10.10.254.2531lowYes
149.49.2.0 255.255.255.0n/av-Route-FW1highYes