Avaya P460 - Manual (Page 90)

Chapter 2 Avaya P460 CLI Commands
80 Avaya P460 Reference Guide
set interface ppp {enable|enable-always|disable|off|reset}
Example:
Example:
Example:
enable Enable PPP and enter modem mode.
enable-always Enter modem mode every time that the proprietary modem
cable is plugged into the console port.
disable Disable PPP and enter terminal mode
off Disconnect the active PPP session.
reset Reset the connected modem.
P460-1# set interface ppp reset
PPP has reset the connected modem.
P460-1# set interface ppp enable
Entering the Modem mode within 60 seconds...
Please check that the proprietary modem cable is plugged
into the console port
P460-1# set interface ppp disable
Entering the Terminal mode immediately