Avaya P460 - Manual (Page 123)

Chapter 2 Avaya P460 CLI Commands
Avaya P460 Reference Guide 113
set spantree priority
User level: read-write, admin.
Use the set spantree priority command to set the bridge priority for STP.
The syntax for this command is:
set spantree priority <bridge_priority>
Example:
set system contact
User level: read-only, read-write, admin.
Use the set system contact command to set the mib2 system contact MIB
variable.
The syntax for this command is:
set system contact [string]
Example:
set system location
User level: read-only, read-write, admin.
Use the set system location command to set the mib2 system location MIB
bridge_priority Number representing the priority of the bridge with a priority
level from 0 to 65535.
0 indicates high priority and 65535 indicates low priority.
P460-1# set spantree priority 4096
Bridge priority set to 4096.
string • The contact name string should be typed inside inverted
commas.
• The name is cleared if you leave this field blank.
P460-1(super)# set system contact “gregory kohll”
*** Set system contact ***
system contact set