Avaya P460 - Manual (Page 33)

Chapter 2 Avaya P460 CLI Commands
Avaya P460 Reference Guide 23
If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
configure
User level: read-write, admin.
Use the configure command to enter configure mode.
The syntax for this command is:
command
Example:
copy l2-config tftp
User level: read-write, admin.
Use the copy l2-config tftp command to upload the Layer 2 parameters from
the current NVRAM running configuration to a file via TFTP.
L To use this command, you need to have an active tftp server, and to create a file
into which to download the data.
If Avaya MultiService Network Manager is running, you do not require an
additional TFTP server.
The syntax for this command is:
copy l2-config tftp <filename> <ip>
Example:
copy tftp EW_archive
User level: read-write, admin.
Use the copy tftp EW-archive command to download the P460 Manager
application into the switch via TFTP.
P460-1(super)# configure
P460-1(configure)#
filename file name (including full path)
ip IP address of the host
P460-1# copy l2-config tftp c:\p460\config 149.49.152.36