Avaya P460 - Manual (Page 130)

Chapter 2 Avaya P460 CLI Commands
120 Avaya P460 Reference Guide
show allowed managers table
User level: read-only, read-write, admin.
Use the show allowed managers table to display the list of the twenty
possible allowed managers IP addresses.
The syntax for this command is:
show allowed managers table
Example:
show arp-aging-interval
User level: read-only, read-write, admin.
Use the show arp-aging-interval command to display the ARP table aging
interval for gateway entries.
The syntax for this command is:
show arp-aging-interval
P460-1(super)# show allowed managers table
1 ) 149.49.32.134
2 ) Not Used
3 ) Not Used
4 ) Not Used
5 ) Not Used
6 ) Not Used
7 ) Not Used
8 ) Not Used
9 ) Not Used
10) Not Used
11) Not Used
12) Not Used
13) Not Used
14) Not Used
15) Not Used
16) Not Used
17) Not Used
18) Not Used
19) Not Used
20) Not Used