Avaya P460 - Manual (Page 175)

Chapter 2 Avaya P460 CLI Commands
Avaya P460 Reference Guide 165
Example:
show ppp baud-rate
User level: read-only, read-write, admin.
Use the show ppp baud-rate command to display the ppp baud-rate.
The syntax for this command is:
show ppp baud-rate
Example:
show ppp configuration
User level: read-only, read-write, admin.
Use the show ppp configuration command to display the ppp configuration.
The syntax for this command is:
show ppp configuration
Example:
show ppp incoming timeout
User level: read-only, read-write, admin.
Use this show ppp incoming timeout command to display the amount of time
P460-1> show ppp authentication
PPP Authentication Parameters:
------------------------------
Incoming: CHAP
P460-1> show ppp baud-rate
PPP baud rate is 38400
P460-1> show ppp configuration
PPP baud rate is 38400
PPP incoming timeout is 15 minutes
PPP Authentication Parameters:
------------------------------
Incoming: None