Avaya P460 - Manual (Page 191)

Chapter 2 Avaya P460 CLI Commands
Avaya P460 Reference Guide 181
The syntax for this command is:
show vlan
Example:
show web aux-files-url
User level: read-only, read-write, admin.
Displays the URL/directory from where the switch can access the Device
Management auxiliary files (for example help files).
The syntax for this command is:
show web aux-files-url
Example:
sync spv
User level: read-write, admin.
Use the sync spv command to synchronize the following between an Active
Supervisor Module and Halted Supervisor Module:
•
Boot bank
• Firmware images
• Device manager image
L You can only execute this command from the active Supervisor Module CLI.
The syntax for this command is:
sync spv
The synchronization may take up to 90 seconds to complete.
Router-1> show vlan
VLAN NAME VLAN ID VLAN MAC
---------------- ------- -----------------
Default 1 02:e0:3b:1d:f9:01
P460-1> show web aux-files-url
the web aux-files-url is 149.49.36.212/P460test