Avaya P460 - Manual (Page 172)

Chapter 2 Avaya P460 CLI Commands
162 Avaya P460 Reference Guide
show port mirror
User level: read-only, read-write, admin.
Use the show port mirror command to display mirroring information for the switch.
The syntax for this command is:
show port mirror
Example:
show port redundancy
User level: read-only, read-write, admin.
Use the show port redundancy command to display information about software
port redundancy schemes defined for the switch.
The syntax for this command is:
show port redundancy
Example:
P460-1> show port mirror
port mirroring
--------------
Mirroring both Rx and Tx packets from port 3/2 to port 4/4
is enabled
P460-1> show port mirror
port mirroring
--------------
No ports are mirrored
P460-1> show port redundancy
Redundancy Name Primary Port Secondary Port Status
----------------- -------------- ---------------- --------
gregory 3/48 3/47 secondary
amir 3/46 3/45 secondary
lior 3/1 3/2 primary
arie 3/34 3/33 secondary
Minimum Time between Switchovers: 1
Switchback interval: 3