Avaya P460 - Manual (Page 137)

Chapter 2 Avaya P460 CLI Commands
Avaya P460 Reference Guide 127
Example:
show device-mode
User level: read-only, read-write, admin.
Use this command to display the switch operational mode (Layer 2 or Layer 3).
The syntax for this command is:
show device-mode
Example:
show dynamic vlans
Use the show dynamic vlans command to display automatically learned
VLANs..
Router-1> show dscp
set qos trust trust-cos-dscp
DSCP ActionAgg Idx Name
---- ------------- ---------------------------------------
0 fwd0 0 DSCP #0
1 fwd0 0 DSCP #1
2 fwd0 0 DSCP #2
3 fwd0 0 DSCP #3
4 fwd0 0 DSCP #4
5 fwd0 0 DSCP #5
6 fwd0 0 DSCP #6
7 fwd0 0 DSCP #7
8 fwd1 1 DSCP #8
9 fwd1 1 DSCP #9
10 fwd1 1 DSCP #10
...
62 fwd7 7 DSCP #62
63 fwd7 7 DSCP #63
P460-1> show device-mode
Device mode is Router