Avaya P460 - Manual (Page 145)

Chapter 2 Avaya P460 CLI Commands
Avaya P460 Reference Guide 135
show ip ospf neighbor
User level: read-only, read-write, admin.
Displays OSPF-neighbor information on a per-interface basis.
The syntax for this command is: show ip ospf neighbor
[<interface-name>] [<neighbor-id>]
Example:
If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
show ip protocols
User level: read-only, read-write, admin.
Use the show ip protocols command to display the IP routing protocol process
parameters and statistics.
The syntax for this command is:
show ip protocols [<protocol>]
Example:
interface-name The OSPF interface name.
neighbor-id Neighbor ID.
Router-1> show ip ospf neighbor
protocol
(Optional) RIP | OSPF.
Router-1 (super) # show ip protocols
Routing Protocol is "rip"
Sending updates every 30 seconds, next due in 0 seconds
Invalid after 180 seconds, flushd after 300
Redistributing: rip
Default version control: rip version 1
Interface Version Key
Routing for Networks:
Routing Information Sources:
Gateway Last Update