Avaya P460 - Manual (Page 150)

Chapter 2 Avaya P460 CLI Commands
140 Avaya P460 Reference Guide
Example:
show ip unicast cache networks
User level: read-only, read-write, admin.
Displays summary of networks handled by the hardware unicast cache database.
The syntax for this command is:
show ip unicast cache networks [<net addr> <net mask>]
Example:
Router-1> show ip unicast cache host
Showing 6 hosts
IP Address Next Hops MAC Address Port Sessions Number
========== =========== ================= ===== ===============
192.168.1.1 10.2.0.2 00.00.28.02.00.02 1/14 1
192.168.2.1 10.2.0.2 00.00.28.02.00.02 1/14 1
192.168.2.2 10.2.0.2 00.00.28.02.00.02 1/14 1
192.168.2.3 10.2.0.2 00.00.28.02.00.02 1/14 1
192.168.2.4 10.2.0.2 00.00.28.02.00.02 1/14 1
192.168.2.5 10.2.0.2 00.00.28.02.00.02 1/14 1
net addr The IP address of the network.
net mask The mask IP address.
Router-1> show ip unicast cache networks
Showing 7 rows (5 networks)
Network Mask Next Hop(s) Total Hosts
=============== ==== =============== ===========
10.0.0.0 16 10.2.0.2 996
71.0.0.0 16 0.0.0.0 1
130.0.0.0 8 192.168.0.130 1124
190.0.0.0 24 10.2.0.2 250
192.168.0.130
191.0.0.0 24 10.2.0.2 250
192.168.0.130
-----
Total: 2621