Avaya P460 - Manual (Page 169)

Chapter 2 Avaya P460 CLI Commands
Avaya P460 Reference Guide 159
Example:
show port channel
User level: read-only, read-write, admin.
Use the show port channel command to display Link Aggregation Group
(LAG) information for a specific switch or port.
The syntax for this command is:
show port channel [<module>[/<port>]] [info]
Example:
P460-1> show port auto-negotiation-flowcontrol-
advertisement asym-tx-only 4/49
Port 4/49 pause capabilities was set
module
(Optional) Number of the module (3-6). If you do not specify a number,
the modules on all the switch are shown.
port
(Optional) Number of the port on the module. If you do not specify a
number, all the ports on the module are shown.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on module 4.
info Displays full information on the port
P460-1> show port channel
Port Channel Status Channel Name and Id
---- --------------- -------------------
3/1 off
3/2 off
3/3 on server1
3/4 on server1
3/13 off
P460-1> show port channel 3/3 info
Port Speed Duplex Vlan Port Trunk Vlan
Priority status Binding
------ ------ ------- ----- --------- -------- --------
3/3 10 half 1 0 off static