Avaya P460 - Manual (Page 25)

Chapter 2 Avaya P460 CLI Commands
Avaya P460 Reference Guide 15
Example:
To set the arp timeout to one hour:
To restore the default arp timeout:
banner login
Use the banner login command to enter the login banner configuration mode.
Use the no banner login command to set the login banner to the default value.
L Before creating a new banner, delete the current banner using the no banner
login command.
The syntax for this command is:
[no] banner login
Example:
banner post-login
Use the banner post-login command to enter the post-login configuration
mode.
Use the no banner post-login command to set the post-login banner to the
default value.
L Before creating a new banner, delete the current banner using the no banner
post-login command.
The syntax for this command is:
[no] banner post-login
Example:
Router-1(configure)# arp timeout 3600
Router-1(configure)# no arp timeout
P460-1(super)# banner login
P460-1(super)#
P460-1(super)# banner post-login
P460-1(super)#