Avaya P460 - Manual (Page 26)

Chapter 2 Avaya P460 CLI Commands
16 Avaya P460 Reference Guide
clear arp-cache
User level: read-write, admin.
L You can only access this command in configure mode.
Type configure at the command prompt to enter configure mode.
Use the clear arp-cache command to delete dynamic entries from the ARP
cache and the IP route cache.
The syntax for this command is:
clear arp cache [<vlan>|<ip addr>[<mask>]]
Example:
clear cam
User level: read-write, admin.
Use the clear cam command to delete all entries from the CAM table.
The syntax for this command is:
clear cam
Example:
vlan VLAN string (up to 16 characters
ip addr IP address
mask IP mask
Router-1(configure)# clear arp-cache
Flushing all arp entries
Flushed 100 ARP entries
Done!
P460-1# clear cam
CAM table cleared.