Avaya P460 - Manual (Page 27)

Chapter 2 Avaya P460 CLI Commands
Avaya P460 Reference Guide 17
clear dynamic vlans
User level: read-write, admin.
Use the clear dynamic vlans command to clear dynamically learned VLANs.
Only the VLANs learned by the switch from incoming traffic are cleared using this
command.
The syntax for this command is:
clear dynamic vlans
Example:
clear event-log
User level: read-write, admin.
Use the clear event-log command to delete the log file of a Supervisor module.
The syntax for this command is:
clear event-log [<module_number>]
Example:
clear interface
User level: read-write, admin.
Use the clear interface command to clear the inband or outband interface
from the NVRAM.
P460-1# clear dynamic vlans
This command will delete all the vlans that were
dynamically learned by the device - do you want to continue
(Y/N)? y
Dynamic vlans were deleted from device tables
spv_num
(Optional) Number of Supervisor Module (1...2)
P460-1# clear event-log
*** Clearing the reset file ***
- do you want to continue (Y/N)? y
P460-1#