ADLINK PCI-8102 - Manual (Page 119)

108 MotionCreatorPro
1. Jog Type:
Continuous Jog
Continuous Jog means that when you press one directional
button, the axis will continuously move with an increasing
speed. The longer you press, the faster it runs. When you un-
press the button, the axis will stop immediately.
Incremental Jog
Incremental jog means that when you click one directional but-
ton, the axis will step a distance according to the Step-Size’s
setting.
2. Jog Setting: Set the parameters for single axis motion.
This parameter is meaningless if “Jog Mode” is
selected, since the velocity and moving distance is
decided by pulse input.
Z
Start Velocity: Set the start velocity of motion in units of
PPS.
Z
Maximum Velocity: Set the maximum velocity of motion
in units of PPS.
Z
Tacc: Set the acceleration time in units of second.
3. Operation Mode: Select operation mode.
Z Absolute Mode: “Position” will be used as absolution tar-
get positions for motion when “Linear Interpolation