ADLINK PCI-8102 User Manual
Page 43
Advertising
32
Signal Connections
The CMP channel is located on P1. The signal names, pin num-
bers, and axis numbers are shown below:
The following wiring diagram is of the CMP on the first 2 axes:
Note: CMP trigger type can be set as normal low (rising
edge) or normal high (falling edge). Default setting is normal
high.
Refer to function_8102_set_trigger_comparator for details.
P1 Pin No
Signal Name
Axis #
30
CMP0
1
31
CMP1
2
From Motion
ASIC
Advertising