ADLINK PCI-8102 - Manual (Page 164)

Function Library 153
PCI-8102
sd_latch: Set the latch control for the SD signal
sd_mode: Set the reaction mode of the SD signal
enable: Set the ramping-down point for high speed feed.
Logic: Set the PEL/MEL logic.
limit_mode:
Select: select the corresponding signal to specified pin
Value Meaning
0 Do not latch
1 latch
Value Meaning
0 slow down only
1 slow down then stop
Value Meaning
0 Automatic setting
1 Manual setting (default)
Value Meaning
0 Normal low (normal open)
1 Normal high (normal close)
Value Meaning
0 Stop immediately
1 Slow down then stop
Value Meaning
0 CLR pin
1 LTC pin
2 SD pin
3 PCS pin