ADLINK PCI-8102 - Manual (Page 90)

Operations 79
PCI-8102
ing point right after previous image is captured. It can achieve con-
tinuous image capturing by this method.
4.7 Other Motion Functions
We provide many other functions on the motion controller. Such as
backlash compensation, slip correction, vibration restriction,
speed profile calculation and so on. The following sections will
describe these functions.
4.7.1 Backlash Compensation and Slip Corrections
The motion controller has backlash and slip correction functions.
These functions output the number of command pulses in FA
speed. The backlash compensation is performed each time when
the direction changes on operation. The slip correction function is
performed before a motion command, regardless of the direction.
The correction amount of pulses can be set by function library.
4.7.2 Vibration Restriction Function
The method of vibration restriction of the motion controller is by
adding one pulse of reverse direction and then one pulse of for-
ward direction shortly after completing a motion command. The
timing of these two dummy pulses are shown below: (RT indicates
reverse time and FT forward time)