East Coast Supercharging ECS Paxton SC1500 C6 Supercharger Kit - Manual (Page 14)

•
Remove the 4 – 13mm bolts holding in the
radiator support cradle to frame. Do not remove
frame from car, just drop aprox 1-2 inches to
allow for installation of radiator relocation bars
included in kit.(fig 36).
•
Install the (2) radiator cradle relocation bars
with the 4 factory 13mm bolts that held the
cradle in place. Bolt Radiator support cradle
to relocation bars with the 4 supplied 8 mm
x 25mm bolts with flat and lock washers in
place. (fig 37)
•
Remove lower radiator hose and thermostat from car by
removing spring clamp from radiator and 2 10mm
thermostat housing retaining bolts. There will be some
residual coolant in the hose. Protect eyes and face.
Capture any coolant with catch basin or rags. Remove
Thermostat housing from hose. (fig 38)
•
Remove thermostat from housing, and replace with
supplied 160 degree thermostat, and reinstall in water
pump with factory 10mm bolts. (fig39)
36
37
38
39