East Coast Supercharging ECS Paxton SC1500 C6 Supercharger Kit - Manual (Page 7)

Pinning the Crank
•
Loosen the 4 nuts supporting the front
engine cradle assembly with a 21mm
socket. DO NOT REMOVE NUTS
FROM SUPPORT BOLTS. The goal is to
drop the front cradle assembly
approximately 3/4 of an inch to prepare
for removal of the rack. Use a chisel or
socket to space down cradle as shown.
(fig 17)
•
Remove two bolts that hold the power steering cooler
to engine cradle with a 10mm socket. (fig. 18)
•
Remove tie rod ends (18mm socket) and
remove from spindles. (fig 19)
•
Remove 11mm bolt from steering knuckle (pic). Slide
knuckle off of rack. DO NOT TURN STEERING
WHEEL AFTER REMOVAL OF NUT. (fig. 20)
17
18
19
20