East Coast Supercharging ECS Paxton SC1500 C6 Supercharger Kit - Manual (Page 28)

•
Take front air dam and lay a straight edge
across, from mounting tab to mounting tab.
Score with a razor knife until through
plastic. Remove and discard excess material
and mounting tabs. (fig 76) Slide air dam
between fascia and radiator support and
attach to radiator cradle with factory 10mm
bolts and plastic push in retaining clips.
Attach front fascia to fascia extension tabs
with factory 7mm bolts. (fig 77)
•
W
hile under the car, reattach factory sway bar taking
care not to pinch or crush charge tube as shown. (fig
78)
•
Install 4 in silicone coupler and tbolt clamps to top of
intercooler. Tighten with 11mm socket.
•
Install silicone reducing coupler to MAF with 11mm t-
bolt clamps as shown. (pic) Slide Charge tube into
intercooler first then back towards throttle body and
tighten t-bolt clamps. Plug in MAF. (fig 79).
•
•
•
76
77
78
79