East Coast Supercharging ECS Paxton SC1500 C6 Supercharger Kit - Manual (Page 21)

•
From shipped head unit assembly, remove cylinder
head mounting bracket (with engraved ECS) from
assembly. Place your 2 -15mm belt tensioner bolts
through front of mounting plate with the 2 supplied
.070 water pump spacers as shown, leaving the two
17mm bolts with polished aluminum spacers, as
well as the two 14mm bolts and washers in place
(see fig 57). Take your time with this step. Placing
hardware in the improper holes, or leaving a bolt
out of the assembly will necessitate removal of the
mounting plate!
•
Reattach slide belt tensioner with hardware
as supplied with head unit assembly. (fig 58)
•
Slide one head unit spacer over the 3/8ths bolt
closest to upper radiator hose as shown. (fig 59)
•
Remove all remaining hardware from head
unit assembly (noting location). Do not
remove the head unit bracket itself from head
unit. (fig 60)
57
58
59
60