East Coast Supercharging ECS Paxton SC1500 C6 Supercharger Kit - Manual (Page 3)

•
Unclip coolant line from top radiator shroud, and
remove upper radiator shroud by removing 4 retaining
bolts (10mm) (fig. 3a & b) Upper shroud will not be
reused.
•
Raise car, remove wheels from car.
•
From below, we will be removing the hardware holding the front fascia to the radiator support and
intake air shroud. The front fascia will NOT be removed. To allow for access to this area, remove the
following :
•
The 5 - 7mm screws from lower intake area of front
fascia (Fig 4)
•
Remove 2 – 10mm nuts from behind air dam
(fig. 5)
3a
3b
4
5