East Coast Supercharging ECS Paxton SC1500 C6 Supercharger Kit User Manual
Page 36
Run 5/32
nd
hose (provided) from vacuum barb fitting on MSD unit to barbed fitting on the previously
installed vacuum t fitting (in brake booster vacuum hose).
•
Recover wiring harness with factory loom, and cover with electrical tape as necessary.
•
Reinstall fuse panel cover
•
Reinstall battery and battery hold down.
•
Install front black shield with supplied dzus
fasteners. (fig 104)
•
Install supplied breather cap on oil filler neck
•
Reinstall front tires.
•
Reinstall Fuel rail covers.
•
Refill factory fluids, including:
o
Anti-freeze
o
Power steering fluid
o
Engine oil
o
Head unit oil
Congratulations!!! The kit installation is complete.
DO NOT START YOUR CAR WITH OUT COMPUTER TUNING. ENGINE DAMAGE WILL OCCUR.
PLEASE SEE A QUALIFIED TUNER IN YOUR AREA TO ENSURE ALL PARAMETERS ARE WITHIN
TOLLERANCES.
Upon start up…
o
Check for fuel leaks
o
Belt tracking and alignment
o
Oil leaks
o
Any rattles or unusual noises
Thank you for purchasing the ECS SC600 kit. We hope you get thousands of miles of enjoyment from the kit.
For more information about other upgrades available for your car, visit us online at
www.eascoastsupercharging.com
.
104
Thank you for purchasing the ECS Supercharger kit for your C6 Corvette. For more information
on maintanence and care of your ECS kit and other upgrades available for your car, visit us
online at www.eastcoastsupercharging.com.