East Coast Supercharging ECS Paxton SC1500 C6 Supercharger Kit - Manual (Page 31)

•
To install catch can assembly: Cut 2 – 2 ½
in pieces of supplied 3/8 fuel line and attach
to either side of supplied PVC valve. Note
directional arrow on PVC valve. Screw 3/8
th
barbed fittings into catch can with 9/16ths
wrench. Attach PVC hose to barbed fitting
on catch can again noting directional arrows
on both PVC and catch can. Attach
remainder of supplied 3/8
th
inch hose to
opposite side of catch can. During
installation, both arrows will be installed
towards intake manifold vacuum port.
(figs 85a,b,c)
•
Remove vacuum line, connecting intake manifold to
valley cover, and attach catch can assembly with
directional arrows pointing towards intake as shown.
Use supplied 3/8
th
worm clamp to intake manifold
fitting to secure. Catch can should rest in the middle of
blower bracket as shown. (fig 86)
85a
85b 85c
86