Laerdal VitalSim - Manual (Page 11)

11
Sounds
On the main display, using the left / right navigation buttons hig-
hlight the sounds functional area.
The sound volume for the selected highlighted sound can
be set directly from the main display using the - and + quick
execution buttons.
The selected Vocal sound can be activated using the quick
execution button.(When ”Cough” is the selected vocal sound,
the button will be labeled Cough.)
The Recall quick execution button reactivates the previously
selected sound for the highlighted sound type.
Set Lung Sounds
Normally Right and Left lung sounds are highlighted together
indicating that the sound for the right and left lung is set the
same (bilateral).
To set Right and Left sounds individually, press the Set Unilat.
quick execution button.
When the sounds are later reset to bilateral, the sound in
the right lung will be used for both lungs.
To alter a lung sound, highlight the sound and press OK.
This will activate the sound selection sub-menu.
The sounds can be selected using the up / down navigation
buttons or using the numeric buttons.
The arrow on the bottom right of the selection field indicates
that there are more selections than presented on the screen.
Volumes can be adjusted using the + / - quick execution
buttons, or by highlighting the volume field and then use the
up / down navigation buttons or the numeric buttons.
Set LL and Set RL quick execution buttons are alternative ways
to select individual (unilateral) lung sounds.
Press OK to implement the new selection and return
to the main screen.
Press C to return without any changes.
New VitalSim DfU En 6/14/05 4:18 PM Side 11