Laerdal VitalSim - Manual (Page 21)

21
PC Software Utilities
Included in the VitalSim package is a CD with PC software supporting scenario and log functions.
The software will run on Windows 2000 and Windows XP.
The VitalSim can be connected to the PC through the USB connector. Through this connection scenarios
made on the PC can be downloaded to the VitalSim for execution. Logs generated and saved on the VitalSim
can also be uploaded to the PC for review, printing and permanent storage.
The software functions are fully documented through help functions and documents residing on the CD.
The intention of this chapter is to give an overview.
Software Installation
Insert the software CD in the CD-Rom drive and wait for the installation program to start. If it does not
start automatically, run the Setup.exe program located on the CD.
Follow the instructions from the installation program.
Note.The VitalSim Scenario Builder requires Microsoft Java Virtual Machine to be installed on your PC.
This will be installed as part of the VitalSim software installation.
USB Driver Installation
The first time the VitalSim is turned on and connected
to the PC, Windows will detect that new hardware is connected,
and start a wizard for driver installation.
Insert the VitalSim CD in the CD-rom drive and follow the
instructions from the wizard to install the VitalSim USB driver.
New VitalSim DfU En 6/14/05 4:18 PM Side 21