Laerdal VitalSim - Manual (Page 20)

Battery Status
The battery status in the remote control is indicated in the
upper right corner of the display. Batteries should be replaced
immediately when battery empty
is indicated.
When the battery is totally empty, the remote control will
turn itself off without any warning.
Replace the remote control batteries with 4 AA size alkaline
batteries.
The battery status for the base unit is not continuously
indicated, as it is for the remote control.
When the battery has reached a state where less than 20%
capacity is remaining, a “Battery low” message will be displayed
by the remote control.
When the remaining capacity in the base unit battery is less
than 10%, a “Replace battery” warning will by given on the
remote control, and the indicator in the base unit will be
flashing alternating between orange and green.
When the battery is totally empty, the base unit will turn itself
off without any warning.
Replace the batteries in the base unit battery case wit 6 C-cell
alkaline batteries.
20
New VitalSim DfU En 6/14/05 4:18 PM Side 20