Laerdal VitalSim - Manual (Page 6)

6
Overview
A. On/Off button and Indicator.
Press once to turn the unit on.
Press again to turn the unit off.
The indicator is steady green if the base unit has contact
with the remote control. If there is no contact with the remote
control the indicator will be blinking green.
If battery needs to be replaced, the indicator will blink,
alternating between green and orange.
B DC power supply input: Used for stationary training and to limit
battery consumption.
C Manikin Connector: Connects the base unit to the manikin.
D Microphone input: External microphone attachment.
Wireless microphone is sold separately.
E USB port: For connection to PC. Used for transfer
of scenarios and logs.
F Remote connector: Used for direct connection
with the remote control. RF communication is disabled
when the units are connected via cable.
G Blood Pressure connector: Connects the tube from
the blood pressure cuff.
H Battery: Holds 6 replaceable C-cell batteries.
I LCD display: Displays status and operation information.
J Quick execution buttons: Function keys.The function of each
button is labelled on the display above the button.
K Navigation keys: Use keys to navigate and select functions
on the display.
L OK / Select key: Use this key to activate selected functions.
M Cancel / Back key: Go back from sub menus without any changes.
N Numerical keys: Use these keys to enter numerical data
or to select numbered parameters.
Can also be used as alphanumerical keys to enter file-
and event-names
O Menu/Setup: Enter Setup Menu.
P Scenario: Use this button to start a scenario.
Q Shift key
R On/Off key: Press once to turn the unit on.
Press again to turn the unit off.
Q
P
O
J
K L
M
N
R
I
H
G
B
C
D E
F
A
New VitalSim DfU En 6/14/05 4:17 PM Side 6