Laerdal VitalSim - Manual (Page 16)

16
Log Events
The Event function allows for entering an event into the log.
The events are chosen from a list of up to 14 that are stored
in the remote control.
To log an event, select the event using the navigation buttons,
and press OK.
The first seven events are preprogrammed. They can be
deleted using the Delete quick execution button and then
be reprogrammed by the user.
The Default quick execution button restores the factory
setting of preprogrammed events.
The last seven events are left open (“---“) for the user
to program.
To program an empty event, highlight the event and press the
Add quick execution button.
Enter the event name using the alphanumeric buttons and the
backspace quick execution button. The shift key is
functional for upper or lower case characters. Up to 13
characters can be used for the event name.
Scenario
The VitalSim can run preprogrammed scenarios, generated
on a PC-based scenario builder program.These scenarios can
be transferred to the base unit using the VitalSim PC utility
program.
Execution of a scenario is started using the Scen button
on the remote control.
Logs and scenarios are synchronized in the following manner:
• A new log is started when a scenario is started.
• Pause and Resume affects both scenario and log.
New VitalSim DfU En 6/14/05 4:18 PM Side 16