Pitney Bowes DM925 - Manual (Page 127)

DM925™ Digital Mailing System Operating Guide
SV62207 Rev. B 7-21
Setting the
Condition for the
Log Full Warning You can set the “log full warning” to notify you when the transaction log is
filled to a certain percentage. The default setting is 90%, which means that
when the transaction log is 90% full, you will receive a warning. The lowest
setting you can use is 80%. The highest setting you can use is 100%.
Follow the steps below to set the log full warning:
1. Press the Menu key.
2. Select Set Up, Accounting Set Up, then Transaction Log. The Trans-
action Options screen appears.
3. Select Log Full Warning.
4. Type in the percentage you want use (from 80 to 100) and press Enter.
The system returns to the Transaction Option menu.
5. Press the left arrow key to return to the Main screen.
Defining the
Action to Take
When the Log is
Full The Action When Full option allows you to select the action you want the
system to take when the transaction log is full. You can choose to stop pro-
cessing mail, to continue processing mail with accounting disabled, or to
process mail and overwrite the transaction log.
Follow the steps below to select the action to take when the log is full:
1. Press the Menu key.
2. Select Set Up, Accounting Set Up, then Transaction Log. The Trans-
action Options screen appears.
3. Select Action When Full:. The Select Action screen appears.
4. Select the action you want the system to take. The system returns to
the Transaction Options menu.
5. Press the left arrow key to return to the Main screen.