Pitney Bowes DM925 - Manual (Page 42)

4 • Running Mail
4-10 SV62207 Rev. B
Selecting
the Postage
Mode and
Running the
Mail Once you decide the appropriate mode for
running your mail job, you select the mode
on your mailing system. To access the
modes, press the Mode key on the 
IntelliLink® Control Center.
The names of the modes as they appear on
the screen are shown in the menu on the
right.
Depending on your model number, you
may have all or only some of these options.
For a detailed description of each mode,
refer to the specific mode topic in this sec-
tion. Follow the steps for your mode
exactly.
While your mailing system processes the mail, the screen:
• Displays the status of the current job.
• Instructs you, if necessary, to insert an envelope or to reboot your sys-
tem (or displays an error message).
• Keeps a running count of processed mail.
• Displays errors, at which point the machine stops immediately.
Mode Selection:
Reduced Speed Reduced Speed Mode provides "Normal" or "Reduced" speed mode for
mail that requires extra care during processing. This option can be saved in
a custom preset.
To use this mode:
1. Press the Mode key.
2. Press the right arrow key to toggle between "Normal" and "Reduced"
speed. The current speed appears on the bottom left corner of the
screen.
Reduced Speed Mode will remain active unless it is changed by the opera-
tor, or the system defaults to ‘Normal’ as part of the Normal Preset.
3
Select Mode
 Reduced Speed
 Key in Postage
 W-O-W® - Weigh on the
Way
 Weigh First Piece
 Differential Weighing
 Manual Weight Entry
 Attached Scale
 Attached Scale - AutoTape
 Seal Only