Pitney Bowes DM925 - Manual (Page 74)

5 • Mailing System Setup
5-8 SV62207 Rev. B
Scale/Rates:
Autoscale You can set AutoScale to On or Off.
Select On to enable the AutoScale feature. When a mail piece is placed on
the scale it will automatically weigh and rate the mail piece.
Select Off to disable this feature. If you disable this feature and your sys-
tem has an attached scale, you need to select the Attached Scale mode
when running mail if you want your system to weigh the mail and calculate
postage. Refer to Selecting the Postage Mode and Running the Mail in
Chapter 4
of this guide.
1. Press the Menu key on the control center and select Set Up. Press the
down arrow key and select Scale/Rates.
2. Select AutoScale to toggle between On and Off.
Scale/Rates:
Carrier/Class
Display Use this option to control how the carrier and class are displayed on the
Main screen.
1. Press the Menu key on the control center and select Set Up. Press the
down arrow key and select Scale/Rates.
2. Select Carrier/Class Disp.
• Select Class Only if you only want the class to display on the Main
screen.
• Select Concatenate Carrier and Class if you want the carrier and
class to display on the main screen. I
Scale/Rates:
Class if New
Piece Use this option to set the system to prompt you to select a new class for
each piece of mail weighed or to keep the last class used.
1. Press the Menu key on the control center and select Set Up. Press the
down arrow key and select Scale/Rates.
2. Select Class if new Piece.
• To clear the class information select Prompt: Select New Class.
• To retain the class information select Retain: Use Previous Class.
3. The system returns to the Scale/Rates Set Up menu.
Scale/Rates:
Destination if
New Piece Use this option to set the system to prompt you to select a new destination
(ZIP, Zone code or country) for each piece of mail weighed, or to keep the
last destination used.
Press the Menu key on the control center and select Set Up. Press the
down arrow key and select Scale/Rates.
1. Select Dest. if new Piece.
• To clear the destination select Prompt: Enter New Destination.
• To retain the destination select Retain: Use Class Destination.
2. The system returns to the Scale/Rates Set Up menu.
NOTE: I
f you select this option the carrier and class name will be
concatenated, or broken out onto multiple lines.