Pitney Bowes DM925 User Manual
Page 39
DM925™ Digital Mailing System Operating Guide
SV62207 Rev. B
4-7
4. Lift the back stop to its “up”
position for larger mail.Set the
sealer lever. Push lever to the
right for sealing or to the left for
postcards and mail you do not
want sealed.
5. Use the thickness adjustment
knob to adjust for envelope
thickness.
• For thicker pieces of mail
(3/8” to 5/8”), or mail contain-
ing several inserts, use the
thick mail setting. For most
mail under 3/8", use the nor-
mal mail settings.
• For large stacks of thin mail,
such as single inserts or post
cards, the thin mail setting
may be needed for better
performance. Refer to the
figure on the right.
To pick a setting, turn the knob to
the arrow located on the feed
cover.
6. Make sure you have sufficient funds in your postage meter. If the mes-
sage “Low Funds” appears on the screen, make sure you can complete
the mail run with the funds you have. If you do not have enough funds,
see Chapter 6, Adding Postage in this guide. uide and envelopes
(about 1/16 inch clearance).
Sealer
Lever
Normal Mail Setting
Thick Mail
Setting
Thin Mail
Setting